Fisher & Paykel HD30 Installation Instructions Manual page 16

Hide thumbs Also See for HD30:

Table of Contents

6. Prepare for Electrical Connection

Downdraft Unit

• Remove the cover of the terminal box from the downdraft unit Fig.14.

• Decide whether the power source should enter the downdraft unit from below or from the back and

remove the respective knock out. Install a UL listed strain relief or conduit fitting (not included) in the

knock out Fig.15.

• If the downdraft unit is being installed with a remote blower, remove the knock out for the control cable.

• With the assistance of another person, lift the downdraft unit into the prepared cutout in the cabinet. The

over counter mounting brackets should rest on the countertop.

• Secure the downdraft unit to the floor and countertop with screws into the previously drilled holes Fig.16.

• Push the end caps into place on the downdraft unit on top of the counter and lock them in place Fig.17.

https://producthelp.fisherpaykel.com/us/Cook/Ventilation/Downdraft/HD36/User_Guide_HD36/05_installation_instructions

Fig.14

Fig.15

Fig.16

Updated: Fri, 28 Jun 2019 03:30:59 GMT

Table of Contents

Hd36