Figure 3-3 Bluetooth Page; Figure 3-4 Bluetooth Pair Request Page; Figure 3-5 Paired Device List Page; Figure 3-6 Auto-Reconnect Page - Garmin GTX 3X5 Series Pilot's Manual

INTERNAL GPS
internal GPS. The GPS position fix details are viewed via CRSR key
selection.
3.4.1 Bluetooth Pairing Instructions
For first time activation of Bluetooth devices:
1. Go to the GTX 345 Bluetooth page to enable pairing mode. Refer to figure 3-3.
2. Enable Bluetooth on the PED.
3. Select "GTX 345" from the list of available devices on the PED. Refer to
manufacturer's information for pairing instructions.
4. When a PED sends a pairing request the Bluetooth Pair Request page will
display the device name and passkey. Refer to figure 3-4.
5. Press ENT on the GTX 345 and accept the pairing request on PED.
3.4.2 Bluetooth Paired Device Information
1. To view the paired device list, press the
2. To view the menu and pairing status, press the
3. Then press the
The Paired Devices list page will display. Refer to figure 3-5.
More information about each paired device and applicable settings can be found by
doing the following steps:
1. To set the auto-reconnect status, highlight the paired device.
2. Then press
ENT
190-01499-00 Rev. A
– If configured, this page displays the status of the

Figure 3-3 Bluetooth Page

Figure 3-4 Bluetooth Pair Request Page

key.
ENT

Figure 3-5 Paired Device List Page

key. Refer to figure 3-6.

Figure 3-6 Auto-reconnect Page

Garmin GTX 335/345 Pilot's Guide
3 – DISPLAY FUNCTIONS/SETTINGS
key.
CRSR
and
8 9
keys, respectively.
3-5