Scantron OpScan 4ES Operator's Manual page 232

Chapter : Select Stacker
Testing the Select Stacker
212
4.
Press Next once to get to the Feed/Select menu
item. The following menu item appears.
NOTE: The Feed/Select menu item appears only if
the Select Stacker is attached. If the menu item
does not appear, the Select Stacker may not be
setup correctly.
5.
Press Run to run the Feed/Select test. The
following menu item appears.
6.
Load a stack of forms into the input tray of the
scanner. (The forms will be reusable upon
completion of the test.)
7.
Press Start to feed sheets. The Select Stacker
passes the test if sheets are fed and placed
alternately into the top and bottom trays of the
Select Stacker.
If sheets are not fed and selected properly, verify
setup of the Select Stacker. If you are unable to
resolve the difficulty, contact Scantron Customer
Support as described in "Product Support and
Services" on page 157.
8.
When you have completed testing, press Next. You
will be advanced to the Background Menu menu
item. Press Exit to exit the background menu.
Scantron OpScan 4ES and iNSIGHT 4ES Scanners