Scantron OpScan 4ES Operator's Manual page 196

Chapter : Transport Printer
Positioning the Printer(s)
176
3.
Select the sheets you want to print on.
Printing on Any Form
Using a ruler with marks for tenths of an inch, align
the ruler with the left edge of a sheet on which you
want to print. Measure to the location on the sheet
where you want your printing to appear. Use this
measurement to position the printer.
Printing on SelfScore Forms
If you are using SelfScore forms, you need to
adjust the printers to 1.6 and 4.3 inches. There are
small triangles on the scanner printer ruler
indicating these two locations.
NOTE: The remainder of this section demonstrates
how to set the printers to 1.6 and 4.3 inches.
However, these concepts can be applied to any
form by simply using the measurement you
obtained above.
4.
Check the printer(s) to see if they are in the correct
position. If not, use the following steps to position
the printer(s).
Scantron OpScan 4ES and iNSIGHT 4ES Scanners