Scantron OpScan 4ES Operator's Manual page 137

Variables
Shown For
Description
Operator's Guide
Default Config - Set
Where <Scanner Model>=
• OpScan 4ES
• iNSIGHT 4ES
All models, all modes except ES/ScanMark
This menu item allows you to set the communications
parameters to the factory default. The factory default
configuration is:
• Start Record 1 = FF
• Start Record 2 = FF
• Start Record 3 = FF
• Start Record 4 = FF
• Start Record 5 = FF
• Start Record 6 = FF
• End Record 1 = 0D
• End Record 2 = 0A
• End Record 3 = FF
• End Record 4 = FF
• End Record 5 = FF
• End Record 6 = FF
• End Document = FF
• Compress = 15
• Record Length = FFFF
• Check Char = FF
• Initiate From = CPU
Chapter 6: Using the Background Menu
Utilities Menu
117