Scaleor Setup; Dvi And Sdi Picture Menu - NDS ScaleOR User Manual

ScaleOR Setup

DVI and SDI Picture Menu

Sharpness:
Press fi or fl to adjust the sharpness (focus) of the displayed image.
Scaling (Graphics):
This parameter is enabled when the input signal is not 16:9, not interlaced, and not 480P or 576P.
Fill = Expands the video image to fill the entire screen. The aspect ratio may not be accurately displayed.
Aspect = Expands the video image until its largest dimension fills the screen. Image may be displayed with
black bars on the top and bottom or the left and right. 1:1 = Displays the video data in its native size and
aspect ratio. Image may be displayed with black bars on the top and bottom and on the left and right.
Select using fi or fl buttons.
Zoom (Video):
This parameter is enabled when the input is 16:9, 480P, 576P, or interlaced.
0 = The image is displayed at a size that fills the screen without losing any video information. The image
presented to the display may include black bars top and bottom or left and right.
1, 2, 3, 4, 5 or 6 = The image is linearly enlarged, while remaining centered, in incremental steps. As the
image becomes larger video information will be lost from the top and bottom and / or left and right.
Select using fi or fl buttons.
10