Power Supply And Wall Adapters - NDS ScaleOR User Manual

Power Supply and Wall Adapters

The power supply is shown with the US wall adapter installed. To exchange the adapter, proceed as
follows:
Place the power supply on your work surface as shown.
Press and hold the button labeled PUSH.
Twist the adapter 1/8 turn toward the OPEN arrow, and lift it off the power supply.
Select one of the provided wall adapters.
Align the tabs on the bottom of the adapter with the notches on the power supply and place the
adapter on the power supply. Press the adapter down and twist it toward the LOCK arrow until it clicks
into place.
5