Table of Contents
Advertisement
Startup
Connect one of the ScaleOR's outputs to a compatible monitor. Connect a video source to the ScaleOR's
input.
Press the power button the ScaleOR's front panel. The power button's illuminated blue ring flashes for
15 seconds then, if a video signal is detected, becomes steady. If a video signal is not detected the ring
continues flashing.
The
NDS
logo is displayed on the monitor until the ScaleOR's initialization is complete. At which time
the illuminated ring stops flashing, if a video signal is detected, and becomes steady blue. At this time
an image of the video signal connected to the ScaleOR's input is displayed on the monitor.
If the ScaleOR has been turned on for more than 15 seconds and a video signal is not detected the
blue ring is will flash at the rate of 1 flash per second.
ScaleOR
5
8
Advertisement
Table of Contents
