Lubrication
To clean and lubricate guide rods, apply
Cleaning
Upholstery
•
Keep pads free of perspiration at all times.
•
Clean and disinfect upholstery at the end of each day, especially areas where perspiration and scalp oil collect.
•
Clean all outside surfaces with non-abrasive, non-chlorinated household cleaners. Virahol® Disinfectant Cleaner
is an effective upholstery care product.
Painted Surfaces
•
Wipe painted surfaces with a damp cloth and car wax.
•
Let dry and buff with a dry cloth.
ABS Plastic Shields & Shrouds
•
Clean with non-abrasive, nonchlorinated household cleaners.
•
Vacuum or wipe dust from recessed areas and surfaces.
Weight Stacks
•
Guide rods should be cleaned monthly with a cotton cloth prior to lubrication. It is critical to remove all old
lubricants and accumulated contaminants prior to applying lubrication.
•
Internal tower and weight stack should be cleaned once every six months with a mild soap and water damp-
ened cloth to remove all dust and accumulated contaminants. Caution should be taken to not leave excess
moisture after cleaning.
TFL#50 Wet Lubricant
Do not lubricate mini-weights (S4/S8 Only)
May cause damage and will void the warranty.
Mini-Weights (95-8356)
to a clean cloth then use to wipe rods.
Page 13