Preparing The Remote; Setting A Remote Code On The Remote; Menu Operation - Sony CDP-NW10 User Manual

Parts and Controls (continued)

Preparing the remote

Insert two R06 (size-AA) batteries into the battery compartment
with the + and – correctly oriented to the markings. When using
the remote, point it at the IR sensor
Notes
• Under normal conditions, the batteries should last for about six
months. When the remote no longer operates the Unit, replace
both batteries with new ones.
• Do not leave the remote in an extremely hot or a humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not use a new battery with an old one.
• Do not expose the IR sensor to direct sunlight or lighting
equipment. Doing so may cause a malfunction.
• If you do not intend to use the remote for an extended period
of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.

Setting a remote code on the remote

You can switch the remote code (CIS2 or CIS3) on the
remote. If the remote code of the Unit and the remote are
different, you cannot use the remote to operate the Unit.
Make sure that the remote code of the remote and the Unit
is the same. For details on setting a remote code on the
Unit, see page 13.
RM SETUP TV/VIDEO TV
1 2
5 6
9 0
ENTER
SELECT
MODE BACK
HOME
DOWN
18 US
on the Unit.
3 4
7 8
CLEAR
UP
Press the A or B SELECT while "RM SETUP" is being
pressed on the remote.
The default setting is CIS2.
When you press the A SELECT, remote code is set to
CIS2.
When you press the B SELECT, remote code is set to
CIS3.
Note
You cannot operate the Unit using the remote when the remote
code of the Unit and the remote are different.

Menu operation

The Home Menu is displayed on the Unit (A).
Using the Home Menu, you can select the sound and
make various adjustments to items.
Using any SELECT (B), you can select an item on the
front panel display.
When the item is displayed on the left side, press a
SELECT on the left side.
When the item is displayed on the right side, press a
SELECT on the right side.
For example, when you want to select "DVD," press the
F SELECT.
When you want to see items below those currently
displayed, press the "H" SELECT.
(When there are additional items, "V" is displayed).
When you want to see items above those currently
displayed, press the "G" SELECT.
(When there are additional items, "v" is displayed).
For details on the Menu tree, see the next page.
C Press to jump to the Mode Menu of each function.
D Press to return to the previous menu.
E Press to return to the top menu.