Chapter 3 Playing Discs (Cdp-Nw10 Only); Playing A Cd Disc - Sony CDP-NW10 User Manual

Chapter 3
Playing Discs
(CDP-NW10 only)
This chapter describes how to play a
CD disc or how to play audio in
various modes using the CDP-NW10.
20 US

Playing a CD Disc

1
Press X/1 (POWER).
The Unit turns on.
2
Press OPEN/CLOSE to open the door, then place a
disc on the spindle firmly.
Playback side
facing the Unit
3
Press OPEN/CLOSE.
The door closes.
4
Press the "CD" SELECT on the Home Menu.
The track list appears on the front panel display.
When the Unit has been connected to the Internet via a
computer, the track titles are downloaded from the
R
Gracenote CDDB server, and the track titles appear
on the front panel display. You can select and play
back desired tracks from these lists. When the Unit is
not connected to a computer or your computer is not
connected to the Internet, only "TRACK1,"
"TRACK2," etc., appear on the front panel display.
5
Press N.
When CD information is downloaded from Gracenote
R
CDDB , you can also press the "TRACK" SELECT.
To stop playing a disc
Press x.
Additional operations
To
Mute the sound
Select a track number
Note
If there is no disc in the Unit or a disc that cannot be read by the
Unit, "NO DISC" appears on the front panel display.
Press
MUTING. To cancel muting,
press it again or press VOLUME +
to adjust the sound volume.
Numeric buttons (0-9).
When the track number
is between 1 and 9:
press the corresponding numeric
button, then press N.
When the track number is
10 or higher:
press the corresponding numeric
buttons in sequence.
e.g.: Playback of the 14th track
Press 1 t 4 in order.