Sony CDP-NW10 User Manual page 51

Cannot monitor other rooms.
, Monitor Privacy is set to on. Set it to off.
, The volume level is low. Press +VOLUME to adjust
the volume.
, Other Units have been using Intercom. Wait for a
while until Monitor is available.
Cannot get track title while listening to music
from NETWORK or MY MUSIC.
, The PC application is not running. Start the PC
application on your computer.
Audio reception is interrupted or distorted.
, The network does not have enough bandwidth.
Check to see if the network cable supports
100BASE-TX or not.
, The network cable, network switch, or router
device may not support 100BASE-TX. Check to see
if the router device supports 100BASE-TX or not.
Operation
The remote does not function.
, The batteries in the remote are weak.
, There are obstacles between the remote and the
Unit.
, The distance between the remote and the Unit is
too far.
, The remote is not pointed at the remote sensor on
the Unit.
, The remote code switch setting on the remote does
not match the setting on the Unit.
Radio stations cannot be tuned in.
, Check that the antennas are connected securely.
Adjust the antennas or connect an external antenna
if necessary.
, The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
, No stations have been preset or the preset stations
have been cleared (when tuning by scanning preset
stations). Preset the stations (page 31).
The remote does not function.
, There are obstacles between the remote and the
Unit.
, The distance between the remote and the Unit is
too far.
, The remote is not pointed at the remote sensor on
the Unit.
, The batteries in the remote are weak.
The disc does not play.
, There is no disc inserted.
, The disc is upside down.
Insert the disc with the playback side facing the
Unit.
, The disc is skewed.
, The Unit cannot play certain discs (page 8).
, The region code on the DVD does not match the
Unit.
, Moisture has condensed inside the Unit.
Remove the disc and leave the Unit turned on for
about half an hour.
The MP3 audio track cannot be played.
, The DATA CD is not recorded in an MP3 format
that conforms to ISO 9660 Level 1/Level 2 or
Joliet.
, The MP3 audio track does not have the extension
".MP3."
, The data is not formatted in MP3 even though it
has the extension ".MP3."
, The Unit can only play MP3 (MPEG1 Audio
Layer3) audio.
, The Unit cannot play audio tracks in MP3PRO
format.
The disc does not start playing from the
beginning.
, Shuffle Play, or Repeat Play has been selected
(page 21, 23, 24).
Cancel Shuffle Play, or Repeat Play (page 21, 23,
24).
, Resume Play has been selected.
During stop, press x on the remote and then start
playback (page 22, 23).
, The title, DVD or PBC menu automatically
appears on the TV screen.
Playback stops automatically.
, Some discs may contain an auto pause signal.
While playing such a disc, the Unit stops playback
at the auto pause signal.
The Unit turns off during DVD playback.
, The Sleep Timer turned off the Unit at the preset
time (page 41).
Some functions such as Stop, Search, Repeat
Play, or Shuffle Play cannot be performed.
, Depending on the disc, you may not be able to
perform some of the operations above. See the
operating manual that came with the disc.
Continue to the next page l
US
51