Set The Temperature Of Your Personal Taste - Inkbird IRF-4S Manual

last for one minute，and the backlight will be on.
Press any button to stop the buzzer and turn off the
backlight.
10
. Set the Temperature
of Your Personal Taste
(1) Short press the"PROBE"button to select the P1,
P2, P3 or P4 mode, the corresponding symbol SET
TEMP of the selected probe lights up. If there is no
operation after 10 seconds, it will automatically exit,
the symbol SET TEMP will be off, and the current
temperature will be displayed. Short press
"MEAT "to select PROG mode or press ▲ or ▼ to
enter PROG mode directly.
(2) Press ▲ or ▼ to increase or decrease the setting
temperature. Long press ▲ or ▼ to rapidly increase
or decrease the temperature setting.
(3) When the temperature of the P1, P2, P3 or P4
reaches the setting temperature, and the corre-
sponding current temperature of the receiver flash
at a frequency of 1 Hz. The buzzer sounds 3 times
in 0.5 second, after a pause of 0.5 second, it will
continue to sound which will last for one minute，
and the backlight will be on. Press any button to
stop the buzzer and turn off the backlight.
-9-