Classeq D400 Quick User Manual

D400 D500
G350 G400 G500
Undercounter Dishwasher/Glasswasher
Quick User Guide
1

Turning the dishwasher on

Push the On/Off button, the button will flash amber to indicate
pre-heating and water filling of the machine. You can continue
to prepare the machine whilst this process occurs.
3

Dishwasher starts cycle

Once the required temperature and water cycle is complete, the amber
indicator will illuminate green and your program will start.
5
Confirming your selection
Cycle indicator will illuminate blue to show a program selection
has been made.
2

Loading the dishwasher

Open the door to load the items. Before loading, ensure debris
is rinsed from the items. Once complete, close the door.
See the User Manual for loading information.
4

Selecting a wash programme

Your machine has one possible program time that is pre-set
to offer the best possible results. These times are as follows:
• Dishwasher – 3min
• Glasswasher – 2min
Your machine has a heat interlock to ensure that the rinse is in
accordance with environmental health requirements. A recovery
time may be experienced between cycles to get back to this
interlock temperature indicated by the flashing amber heating
indicator. For full information on operating temperatures and the
interlock, please refer to the latest version of the Engineers
Manual on the Classeq website for full information regarding
temperatures and interlock settings.