Installation And Connection; Installation Of System - ALLIANCE ALLPH35R410 Installation & Operation Manual

3. I N S TA L L AT I O N A ND CO N N E CTI O N
3.1 INSTALLATION ILLUSTRATION
INSTALLATION ITEMS:
Alliance only provides the main unit; the other items in the illustration are necessary spare parts for the water system , that the installer must
provide.
ATTENTION:
Please follow these steps when using for the first time
1. 0pen valve and charge water.
2. Make sure thatthe pump and the water-in pipe have been filled with water.
3. Close the valve and start the unit.
The schematic diagram is for reference only. Please check the water inlet/outlet label on the heat pump while plumbing installation.
5