Maintenance And Inspection; Maintenance - ALLIANCE ALLPH35R410 Installation & Operation Manual

Swimming pool heat pump
Table of Contents

Advertisement

5 . MA I N T E N A N C E A ND I N S PE CTI O N

5.1 Maintenance

• You should avoid no water or air entering into system , as this will influence unit's performance and reliability. You should clear the pool/spa filter
regularly to avoid damage to the unitas a result of the dirty of clogged filter.
• The area around the unit should be dry, clean and well ventilated.
• The operation pressure of the refrigerant system should only be serviced by a certified technician .
• Check the power supply and cable connection often, .Should the unit begin to operate abnormally , switch it off and contact a qualified technician.
• Discharge all water in the water pump and water system ,so that freezing of the water in the pump or water system does not occur. You should
discharge the water at the bottom of water pump if the unit will not be used for an extended period of time. You should check the unit thoroughly
and fill the system with water fully before using it for the first time after a prolonged period of no usage.
18

Advertisement

Table of Contents
loading

Table of Contents