AUTOMATIC TRANSAXLE
With the cage sufficiently tilted, remove a ball from the cage. Repeat this until all of the
balls are removed. If the balls are tight in the cage, use a blunt edged prytool to pry the
14.
Pivot the cage and inner race assembly until it is straight up and down in the outer
race. Align the cage windows with the outer race lands while pivoting the bearing
cage.
http://www.chiltondiy.com/content/8687/8687_7_3.html
balls from the cage
Click to enlarge
Стр. 49 из 70
18.11.2005
Need help?
Do you have a question about the Taurus and is the answer not in the manual?