Ford Taurus Manual page 1139

Hide thumbs Also See for Taurus:

Table of Contents

CRUISE CONTROL

Install the valve to the bracket.

Connect the vacuum hose.

Adjust vacuum dump valve. For details, please refer to the adjustment procedure

located later in this section.

Connect the negative battery cable.

Adjust the vacuum dump valve so that it is closed (no vacuum leak) when the

brake pedal is up (brakes released) and open when the pedal is depressed.

The vacuum dump valve releases vacuum in the servo assembly whenever the

brake pedal is depressed and thus acts as a redundant safety feature. The

vacuum dump valve should be checked whenever brake application does not

disconnect the speed control system.

Disconnect vacuum hose with the white stripe from the dump valve. Connect a

vacuum pump to hose and apply vacuum.

If a vacuum cannot be obtained, hose or dump valve is leaking. Replace or repair

defective components as required.

Step on the brake pedal, vacuum should be released. If not, adjust or replace

http://www.chiltondiy.com/content/8687/8687_6_5.html

Vacuum dump valve location

Click to enlarge

Стр. 30 из 33

Show Quick Links

Table of Contents