Speed Tab - Monoprice Maker Ultimate 2 User Manual

Speed Tab

The Speed Tab features the following options:
 Top/Bottom Speed (mm/s): Sets the printing speed of the top and bottom surfaces
of the model.
 Outer shell speed (mm/s): Sets the printing speed of the external shell surfaces.
 Inner shell speed (mm/s): Sets the printing speed of the internal shell surfaces.
 Infill Speed (mm/s): Sets the printing speed of the infill inside the model.
 Support Infill Speed (mm/s): Sets the printing speed of infill inside the model
supports.
 Support Interface Speed (mm/s): Sets the printing speed of the top and bottom
surfaces of the model supports.
 Initial Layer Speed (mm/s): Sets the printing speed of the first layer of the model.
 Travel speed (mm/s): Sets the movement speed of the nozzle when not printing.
20