Table of Contents

Advertisement

02-12
8810-03
4. AIR BAG MODULE AND OTHER COMPONENTS
This section describes the air bag module installed in Kyron.
The module consists of the inflator, the cushion, and the mounting cover.
1) DAB: Driver Air Bag
The driver's air bag is installed inside the steering wheel.
If the acceleration sensor (inside the air bag unit) is activated by the deceleration from vehicle
collision, the detonation is fired by the electrical signal of the air bag unit.
Then, the detonation sets off explosives and nitrogen gas is generated.
At this point, the air bag very quickly deploys and the gas is emitted from the relieving hole to
absorb impact upon the driver.
(1) Components
AIR BAG
KYRON 2005.10
1.
Air bag cover
2.
Air bag housing
3.
Horn switch
4.
Retainer ring
5.
Air bag cushion (approx. 50 liters)
6.
Inflator* (approx. 190 Kpa)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents