SSANGYONG KYRON 2005.10 Manual page 256

01-32
0000-00
ENGINE D20DT
KYRON 2005.10
7. Plug the removed components with clean
and undamaged sealing caps and store it
into the box to keep the conditions when
it was installed.
8. Clear the high pressure offset value by
SCAN- 100 after replacing the high
pressure pump.
9. To supply the fuel to transfer line of HP
pump press the priming pump until it
becomes hard.
- Do not crank engine before having
filled pump.
10. Check the installed components again and
connect the negative battery cable. Start
the engine and check the operating status.
With SCAN-100, check if there are current
11. faults and erase the history faults.