SSANGYONG KYRON 2005.10 Manual page 83

0-29
4892-01
F. INPUT/OUTPUT SIGNALS FOR HDC OPERATION G. OPERATION OF HDC INDICATOR CONTROLLER
This table describes the coming-on and blinking mode of HDC indicator according to the HDC
switch operation(ON/OFF).
The HDC indicator on the instrument panel has two modes; green (function lamp) and red
(warning lamp).
The HDC switch is a push & self return type switch ? when you press it once, it starts to
operate and when you press it again, it stops the operation.
H. ESP (ELECTRONIC STABILITY PROGRAM)
ESP (Electronic Stability Program) recognizes critical driving conditions, such as panic
reactions in dangerous situations, and stabilizes the vehicle by wheel-individual braking and
engine control intervention with no need for actuating the brake.
This system is developed to help the driver avoid the danger of losing the control of the
vehicle stability due to under-steering or over-steering during cornering.
CIRCUIT
KYRON 2005.10