Table of Contents
Advertisement
CS
UPPER MOUNT (Continued)
Fig. 113 UPPER ENGINE MOUNT
1 - INTAKE MANIFOLD
2 - UPPER ENGINE MOUNT
3 - FRAME RAIL
1 - BOLT
2 - BRACKET
(4) Tighten the bolts attached to the inner frame
rail to 68 N·m (50 lbs. ft.) (Fig. 113).
(5) Remove the jack used to support engine assem-
bly.
(6) Install the air cleaner element housing (Refer
to
CLEANER HOUSING - INSTALLATION).
LEFT MOUNT
REMOVAL
(1) Disconnect the negative battery cable.
(2) Remove engine cover.
(3) Remove radiator cooling fan assembly (Refer to
7
REMOVAL).
(4) Raise and support the vehicle.
(5) Remove both of the engine mount to cradle
nuts (Fig. 114).
(6) Lower the vehicle.
(7) Connect the engine suport fixture and support
engine weight.
(8) Remove the engine mount bolts and remove
mount (Fig. 114).
Fig. 114 LEFT ENGINE MOUNT
3 - ENGINE MOUNT
4 - LEFT EXHAUST MANIFOLD
9
-
ENGINE/AIR
-
COOLING/ENGINE/RADIATOR
ENGINE 9 - 71
INTAKE
SYSTEM/AIR
FAN
-
Advertisement
Table of Contents
