10. Removal Procedure
10.1 Removal Procedure of Indoor Unit
Step
1. Remove filte
a
Open the panel.
b
Loosen the clasp shown in the fig and
then pull the left filter and right filer
outwards to remove them.
2. Remove horizontal louver
Push out the axile bush on horizontal
louver. Bend the horizontal louver with
hand and then separate the horizontal
louver from the crankshaft of step motor
to remove it.
42
Caution: discharge the refrigerant
completely before removal.
Procedure
Horizontal louver
Axile bush
Removal Procedure
Panel
Clasp
left filter and right fil
Location of step motor