Gree GWC12NC-K3NNA3E Service Manual page 49

Step
9. Remove stepping motor
Remove the screw fixing step motor and
then remove the step motor.
10. Remove motor and cross flow blad
a
Remove the screws fixing motor clamp
and then remove the motor clamp.
b Remove the screws at the connection
place of cross flow blade and motor; lift
the motor and cross flow blade upwards
to remove them.
c Remove the bearing holder sub-assy.
46
Procedure
Screws
Holder sub-assy
Removal Procedure
Step motor
Screws
Motor clamp
Cross flo
Motor
Bottom case