Hardware Structure
2.6
LoRa Concentrator RAK2245 Pi HAT
2.6.1
RAK2245 Pi HAT(Model Name is: RAK2243) is a LoRa Concentrator board
which follows the Pi HAT standard, and can be mounted to Pi board with 40-pin
connector.
For detailed information about RAK2243, please refer to the datasheet as:
RAK2245_Pi_Hat_User_Manual_V1.0.pdf
Figure 6 | LoRa Hardware Structure
Cellular Board RAK2013 Pi HAT
2.6.2
RAK2013 is an add-on board following Raspberry Pi HAT standard. It can
transmit UART data from Raspberry Pi to Cellular network. It can support
several cellular protocol, such as NB-IOT, CAT-M, CAT1 or CAT 4, by
choosing different modular on the board.
The RAK2013 integrates audio codec and audio amplifier on it, with carrier
operator's network, it can support VoLTE function. For easy use, there are
earphone connector, MIC connector and speaker connector with audio
amplifier.
For detailed information about RAK2013, please refer to the datasheet of:
RAK2013_User_Manual_V1.0.pdf
RAK7243
RAK7243 User Manual V1.1
9
9