Hardware Interfaces - RAKwireless RAK7258 User Manual

Hardware Interfaces

2.5
The hardware interfaces of RAK7258 gateway include DC 12V, ETH interface, Console
interface, Reset key, USB port, Nano SIM slot, TF Card slot, Status indicator LEDs(6),
LoRa Antenna connector etc. As shown in the following figure.
The function of the Reset key is as follows:
Short press: Restart the Gateway;
Long press (5s and above): Restore Factory Settings;
The status of the LEDs is described as below:
The hardware interfaces of RAK7258 gateway include DC 12V, ETH interface,
Console interface, Reset key, USB port, Nano SIM slot, TF Card slot, Status
indicator LEDs(6), LoRa Antenna connector etc. As shown in the following
figure.
Figure 3 | Hardware Interfaces
7258
RAK
8
RAK7258 User Manual V1.3