Hardware Interfaces; Figure 4 | Hardware Interfaces - RAKwireless RAK7258 User Manual

Hardware Interfaces

2.6
The hardware interfaces of RAK7258 gateway include DC 12V, ETH interface, Console
interface, Reset key, USB port, Nano SIM slot, TF Card slot, Status indicator LEDs(6),
LoRa Antenna connector etc. As shown in the following figure.
The function of the Reset key is as follows:
Short press: Restart the Gateway;
Long press (5s and above): Restore Factory Settings;
The status of the LEDs is described as below:
LEDs
PWR
ETH
LoRa
ACT
STAT

Figure 4 | Hardware Interfaces

Status Indication Description
 Power Indicator, Led on when device power on
 ON - linkup
 OFF - linkdown
 Flash - Data Transmitting and Receiving
 ON - LoRa1 is working
 OFF - LoRa1 is not working
Flash - Indicate that LoRa1 Packet

receiving and sending
 Expanded Led indicator, useless
 Expanded Led indicator, useless
7258
RAK
RAK7258 User Manual V1.3 9