Routing Table; Session Table - Billion BiGuard 50G User Manual

4.2.3 Routing Table

The Routing Table displays the current path for transmitted packets. Both static and
dynamic routes are displayed.
No.: Number of the list.
Destination: The IP address of the destination network.
Netmask: The destination netmask address.
Gateway/Interface: The IP address of the gateway or existing interface that this
route will use.
Cost: The number of hops counted as the cost of the route.

4.2.4 Session Table

The NAT Session Table displays a list of current sessions for both incoming and
outgoing traffic with protocol type, source IP, source port, destination IP and
destination port, each page shows 10 sessions.
No.: Number of the list.
Protocol: Protocol type of the Session.
From IP: Source IP of the session.
From Port: source port of the session.
To IP: Destination IP of the session.
To Port: Destination port of the session.
74