Dns Inbound - Billion BiGuard 50G User Manual

2.5 DNS Inbound

Using DNS Inbound is a great way to intelligently direct network traffic.
DNS Inbound is a three step process. First, a DNS request is made to the router via
a remote PC. BiGuard 50G, based on settings specified by the user, will direct the
requesting PC to the correct WAN port by replying the selected WAN IP address
through the built-in DNS server. The remote PC then accesses the network via the
specified WAN port. How BiGuard 50G directs this traffic through the built-in DNS
server depends on whether it is configured for Fail Over or Load Balancing.
Learn how to make DNS Inbound on BiGuard 50G work for you in the following
section.
27