Define Ip Address Of Kelunji Hub Computer - Gecko Compact Product User Manual

Define IP address of Kelunji Hub computer

As supplied the Ethernet adaptor will try to connect to our Cloud-based Kelunji Hub data
reception system. If you have subscribed to our online hosting service you will be able to
extract data from this server's archive using Waves.
If you have chosen to run Kelunji Hub on a computer on your local network, you'll need to
modify the Host destination IP address that your Ethernet adaptor is trying to connect to. In
the left side bar menu, click on "Advanced" under the Network settings, as shown below.
If you have enabled Telemetry via Ethernet in your Gecko, the Gecko will now connect to
the Kelunji Hub application on the Host server, then automatically start streaming data. You
can check the connection status on the Gecko Home screen by pressing the Right button
until the Connection status message is displayed.
Click on "KelunjiHub" in the
Host Table to highlight it,
then click the "Edit" button.
A small window will pop up
allowing you to edit the Host
name and address.
Warning: DO NOT change
the name of the Host
from "KelunjiHub"
Enter the IP address of the
computer that is running
your local copy of Kelunji
Hub, then click "OK".
To apply all of the new
settings, reboot the IOLAN
device using the link at the
bottom right of the screen.
38