Perle Iolan Ds1 Ethernet Adaptor - Gecko Compact Product User Manual

Appendix C

Perle IOLAN DS1 Ethernet Adaptor

If you need to stream your seismic data over a Local Area Network (LAN) or over the
Internet in real time to a remote computer, an Ethernet adaptor is available for connection
to the recorder's communication port. Our free Kelunji Hub and Live Stream software is
available for installation on your own remote Windows or Linux computer, or you can
subscribe to our cloud data hosting service. Email sales@src.com.au for pricing and
conditions on our cloud hosting service.
The "IOLAN DS1" Ethernet adaptor, manufactured by Perle, is a serial to Ethernet adaptor
which can be configured using a web browser connected to the Ethernet side of the device.
We have set the default IP address of the device to 192.168.20.100 with a gateway setting
of 255.255.255.0. It is unlikely that the default IP address will be allowed on your LAN, so
you will need to modify the device settings. The device is also configured to stream data to
our cloud data service, so if you have installed Kelunji Hub on a computer on your network
you will need to modify the IP address to that of the destination computer.
To change these settings, you will need to communicate with the device using a web
browser. To do this, set your computer's IP address to 192.168.20.50, then set your
computer's gateway address to 255.255.255.0, then open a web browser and type
http://192.168.20.100/ into the address bar. You will be asked for a username and
password to log in to the device, which are admin and superuser respectively.
36