Change Ip Address Of The Ethernet Adaptor - Gecko Compact Product User Manual

Change IP address of the Ethernet adaptor

When you log into the Ethernet adaptor, you'll see the screen below.
You will most likely need to
change the IP address of the
device to an address that is
compatible with your LAN.
Click on the "Network"
button on the main screen
or the "Network" folder in
the left side bar to view the
network settings.
Click on the "IP Settings"
button or icon in the side
bar folder to edit the IP
address, subnet mask, and
gateway address. You can
set the device to have a
fixed IP address or you can
set it to use DHCP to
request an automatic
address from your network.
DHCP is the most common
way computers connect to a
LAN.
If you have set the device to
use DHCP but are unsure
what IP address it has been
assigned, download the
Device Manager software
from perle.com and install it
on a Windows PC to see the
devices on your network.
Additional network settings
are available. If you are
unfamiliar with these
settings, please consult your
IT Administrator for advice.
37