The Main Menu
Pressing the Menu button from the home screen will show you a list of actions and settings
for managing your recorder. The main menu includes some or all of the following items:
If you change any settings, they are applied once you exit to the home screen. The settings
are also automatically saved to the recorder's configuration file.
Unmount SD card
In version 3.2 of the Gecko firmware we removed the option to stop and start data
sampling. Data is being sampled at all times, whether an SD card is present or not, because
data can be telemetered without an SD card. If there is no SD card, backfilling of unsent
data will not be possible.
Before you remove the SD card, you should unmount the SD card so that the system does
not try to write data to the SD card while it is being removed, an action that can corrupt the
file, file system, or SD card.
When you insert an SD card, it will automatically be mounted.
Main Menu
Unmount SD card
> Station Info
Sample Rate
Channels to Store
Channels to Send
3D sensor
1D sensor
Input Amplifier
Trigger & Alarm
Telemetry
Settings File
Start Calibration
6