To view the osD menu, press the Joystick button at
the bottom of the monitor and then enter the Menu.
Set the options by moving the Joystick Button left, right,
Select the "next Menu" button to enter the more option
Move the joystick up (▲) to leave the OSD menu until
To return to the upper menu or set other menu items,
move the joystick up (▲).
Each option is explained below.
To adjust the brightness of the screen.
To adjust the contrast of the screen.
You can set a response time for displayed pictures based on the speed of the screen. For
a normal environment, it is recommended that you use 'Off'. For a fast-moving picture, it is
recommended that you use 'High'.
Restore all factory default settings. Move the joystick
(for RGB only).
Switch to full screen mode according to input image signal.
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor ratio
To adjust the clearness of the screen .
To set offset level. (Only for HDMI input)
To improve the clarity and stability of the screen. (Only for HDMI input)
To customize the color of the screen.
To adjust the position of the screen.
To improve the clarity and stability of the screen.
To adjust the volume. (Only for HDMI input)
To customize the screen status for a user's operating environment.
to reset immediately.