asseMblInG anD PRePaRInG
Installing the Monitor
assembling the stand base
M4 x 20
P5 x 25
Illustrations in this document represent typical
procedures, so they may look different from
the actual product.
To protect the screen from scratches, cover
the surface with a soft cloth.
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Do not carry the monitor upside down by just
holding the base. This may cause the monitor
to fall off the stand and could result in personal
When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
If you use the monitor panel without the stand
base, its Joystick Button may cause the moni-
tor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the Joystick Button to
Remove the stand before installing the
Monitor on a wall mount by performing the
stand attachment in reverse.