TS2200: Tripod Turnstile
TS2211: Tripod Turnstile with Controller and RFID Reader
TS2222: Tripod Turnstile with Controller and Fingerprint Reader with RFID function
Please read this document carefully before installation and using the device.
1. Technical Specifications
Input Voltage
Rated Power
Operating Environment
Operating Temperature
Operating Humidity
Flow Rate
Input Control Signal
2. Arm Installation and Equipment Testing
2.1 Arm Installation Method
Installation procedure
1. Open the glue and apply in the square openings of
the arms as well as the four countersunk screws, as
shown in figure 2-1. (This is to prevent screws from
getting loose due to vibration after being used for a
long time.)
TS2200 Series Vertical Tripod Turnstile User Manual
AC 220V / 110V,
50Hz / 60Hz
60 W
Indoor and Outdoor
-28ºC ~ 60ºC
5% ~ 85%
25~48 passages / minute Dimension(mm) Figure 1
Dry contact
1110
Version: 1.0
Max. Tolerance of Arms
Ingress Protection Degree
Arm Length (mm)
Net Weight
Gross Weight
Package Size (mm)
500
320
500
Figure 1
This opening shall be
applied with glue evenly.
1
Time: 2014-3
Center: 80 kg
End: 40 kg
IP54
500
65kg
75kg
L = 1110, W = 320, H = 980
L = 1200 , W = 440, H = 1080
740
740
1110
Figure 2-1
Need help?
Do you have a question about the TS2200 Series and is the answer not in the manual?
Questions and answers