ZKTeco TS 1000 Pro Series Installation Manual

ZKTeco TS 1000 Pro Series Installation Manual

Tripod turnstile
Hide thumbs Also See for TS 1000 Pro Series:

Advertisement

Quick Links

Installation Guide
Applicable Models: TS 1000/2000 Pro series tripod turnstile
Version: 2.0
Date: March. 2020
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TS 1000 Pro Series and is the answer not in the manual?

Questions and answers

Summary of Contents for ZKTeco TS 1000 Pro Series

  • Page 1 Installation Guide Applicable Models: TS 1000/2000 Pro series tripod turnstile Version: 2.0 Date: March. 2020...
  • Page 2 Chapter 1 Installation 1.1 Installation conditions As shown in Figure 1-1. Figure 1-1 1.2 Cabling 1.3 Drilling holes 1.4 Fix the device...
  • Page 3 Chapter 2 Installation Notes Figure 2-1 Figure 2-2 Note: If the arm can not be lift, please push the arm to close to cabinet direction first, then lift the arm manually.
  • Page 4 Chapter 3 Control Board Introduction Turnstile control board’s diagram as shown in Figure3-1 Drop arm Opening signal input Passing indicator Right indicator Left indicator Counter 1 Counter 2...
  • Page 6 Chapter 4 Maintenance...
  • Page 7 Chapter 5 Troubleshooting...

This manual is also suitable for:

Ts 2000 pro series

Table of Contents