Table of Contents
Advertisement
Omit Allow & Double Knock
LED Keypad:
Press
to toggle double knock status on or off.
Press [9] to turn all double knock zones on.
Press [0] to turn all double knock zones off.
•
Press
to enter into menu. LED's 1 and 2 are on.
•
Press [1] to select Double Knock.
•
Press zone number [1-8] to choose a particular zone.
•
Press the zone [number] or
status on or off. The appropriate LED is on when the zone is
set up as Double Knock. Default settings are off.
•
Press
twice to leave the menu.
2 = Omit Allow
When a zone is programmed as Omit Allow, the panel allows the zone to be omitted for one set period by the
user when setting the system.
Programming a Zone as Omit Allow
The [up arrow] scrolls through zones.
Press
to toggle omit allow status on or off.
Press [9] to turn all omit allow zones on.
Press [0] to turn all omit allow zones off.
LCD Keypad:
While in Engineer program mode press
0>Omit allow & Double Knock is displayed then press
•
Press [2] to select Omit Allow. The first zone is
displayed with status on or off.
•
Press the [zone number] or
status on or off.
•
Press the
or [zone number] to go to the
other zones and follow the same procedure as above.
•
Press
twice to leave the menu.
Accenta/Optima Engineer's Manual
to toggle the double knock
or press
until
.
to toggle the
32
1
2
3
4
5
[1]
1
2
3
4
5
[1-8] or
4
5
1
2
3
1
2
3
4
5
1. Double Knock
2. Omit Allow
[2]
2: <Zone Name>
Omit Allow:NO
[zone number] or
2: <Zone Name>
Omit Allow:YES
Omit Allow &
Double Knock
6
7
8
8
6
7
7
8
6
6
7
8
Hide quick links:
Advertisement
Table of Contents
