Table of Contents
Advertisement
Accenta/Optima Engineer's Manual
6 = Zone Names
This option allows each of the eight zones to be given a name from the library (Appendix 2).
LCD Keypad:
•
Press
or to go to menu 6>Zone Names.
•
Press [6] or
to go to zone 1 descriptor.
•
Press
to scroll through the library to the desired
descriptor.
•
Press the
to go to the next zone.
•
To assign additional zone descriptors repeat the above procedure.
•
Press
to save programming and leave the function.
LED Keypad:
The LED keypad cannot program zone names.
NOTE: The
is not available on the LED keypad.
7 = Timers
This option allows the Bell Time, Bell Delay and Rearm Count to be changed.
NOTE: The
key takes you back to the first digit.
71 = Bell Time
This is the duration for which the external bell output is active.
The range is 01-99 minutes. The default is 15 minutes.
LCD keypad:
To change the Bell Time from 15 to 20 minutes:
•
Press
for menu 7>Timers.
•
Press [7] or
for option 71 Bell Time.
•
Press [1] or
. The Bell Time in minutes is displayed.
•
The cursor is under the first digit. Select [2].
•
The cursor moves to the second digit. Select [0].
•
To accept the change press
OR to cancel the change press the
then
key twice.
25
Timers
6>Zone Names
[6] or
1: Descriptor
1: New Descriptor
6>Zone Names
7>Timers
[7] or
71>Bell Time
[1] or
Bell Time
Minutes? 15
[2] and [0]
Bell Time
Minutes? 20
then
or
7>Timers
Hide quick links:
Advertisement
Table of Contents
