Motherboard Standoffs
Standoffs prevent short circuits by securing space between the motherboard and
the chassis surface. Three standoffs are pre-installed. Some motherboards require
additional standoffs. The chassis accessory box contains standoffs and rounded
Phillips head screws.
Compare the mounting holes in the motherboard to those in the chassis and add or
remove standoffs as needed. Secure the hexagonal standoff, rounded side up, by
screwing it into the mounting base of the chassis. Once all standoffs are in place,
you are ready to mount the motherboard.
Motherboard Installation
Installing the Motherboard
1. Review the documentation that came with your motherboard. Become familiar
with component placement, requirements, precautions, and cable connections.
2. Install standoffs in the locations required by your motherboard.
Figure 2-11. Installing the Motherboard
Chapter 2: Chassis Setup and Maintenance
2-11