Functions - KERN EC Series Operating Instructions Manual

11 Functions

How to access and change various functions
(1) Press Mode and release it when "Func" appears
showing that the balance is in function mode.
(2) The first mode of the balance "1. A.0_" for Auto
Zero appears.
To change the parameter at the last digit, hit T key.
As to contents of parameters, see next page.
(3) By hitting Mode, the function item will advance
successively according to following sequence.
Auto Power Off
←
↓
Response
→
"41.oc._" will be passed depending on setting.
* To advance the function item, hit Mode key.
** To change parameters, hit T key.
EC-BA-defs-0113
Zero Setting
Interface
→
Points of key operation
Access to Functions
(Interfacing
Conditions)
→
Auto Zero
Weighing Unit
25