Parameter List Of Functions - KERN EC Series Operating Instructions Manual

12 Parameter List of Functions

* To change parameters (conditions), see page 23.
1 . A . 0 1 : Auto zero adjustment is effective.
0 : No zero adjustment.
2 . A . P . 0 : Automatic power off in use of battery (option) - not effective.
1 : Automatic power off in use of battery (option) - effective.
3 . r E . 1 : Stabilisation time
2 : Quick
3
↑
:
4
: ↓
5 : Slow
4 . I F. 0 : No interfacing
1 : Constant serial output (6-digit) effective with output option.
2 : Constant serial output (7-digit) effective with output option.
41 . o . c. 0 : No output
1 : Constant serial output
2 : Constant serial output of stabilised data ***
3 : - Nil -
4 : Automatic output with a load after stabilisation ***
5 : One output when stabilised (no output with unstable data) ***
6 : One output when stabilised (random output with unstable data) ***
7 : - Nil -
42 . b . L. 1 : 1200 bps
2 : 2400 bps
3 : 4800 bps
43 . P A . 0 : No parity bit
1 : Odd parity check
2 : Even parity check
5 . un . 1 : Weighing unit in "g"
2 : Weighing unit in
3 : Weighing unit in
4 : Weighing unit in
5 : Weighing unit in
** Other weight units than "g", "kg" and "lb" are indicated by
recommended to stick a label of the unit at the
*** Setting at these, output of unit weight is impossible.
26
"kg"
"ct" **
"oz" **
"lb"
Wide
↑
↓
Narrow
mark.
EC-BA-defs-0113
Auto-Zero
Auto-Power
OFF
Vibration
Filter
Data output
Output
condition
at the port
Baud Rate
Parity
mark. It is