Levelling; Electrical Supply - KERN EC Series Operating Instructions Manual

5 Levelling

Watch if the balance is level. Locate the level in front of the balance and four
adjusting legs beneath it. Drive these legs to centre the bubble in the red circle of the
level. Watch if all legs are settled on the table securely. See (b

6 Electrical Supply

The mains Adapter should only be connected to a 230 V / 50 Hz electrical supply. Do
not connect to any other mains voltages unless another mains voltage is specifically
given on the Model label.
The plug must be grounded according to VDE regulations.
Attach the adapter cable to the rear of the balance.
Only then:
Plug the mains adapter (230 V AC / 9 V DC / 400 mA) in the socket.
Adjust the balance, see chapter 11 "Span Adjusting".
20
).
EC-BA-defs-0113