Advertisement
Quick Links
Wall Display
Assembly GUIDE
Trim Piece
Standard Base
Connector
Small Bottle Support
Large Bottle Support
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
TOP SUPPORT (X2)
TRIM PIECE (X2)
SCREWLESS CONNECTOR (X4)
STANDARD CONNECTOR (X2)
SCREWLESS BASE CONNECTOR (X1)
STANDARD BASE CONNECTOR (X1)
Standard Connectors
Trim Piece
Screwless Connectors
Screwless Base Connector
Package Contents
END LADDER
LARGE BOTTLE
SUPPORT (X18)
SMALL BOTTLE
SUPPORT (X18)
SHELF
SUPPORT (x18)
*DEPENDING ON MODEL
Page 1
Screwless Connectors
Top Supports
MIDDLE LADDER
(X2)
(X2)
WOOD PUTTY
WOOD SCREWS
FINISH NAILS
Questions?
888.373.6057
or visit
wineracksamerica.com
End Ladder
Middle Ladder
tools for assembly
Cordless Drill
Utility Knife
Finish Nailer
Hammer
Nail Setter
Wood Glue
Advertisement
Related Manuals for Wine racks America Wall Display
Summary of Contents for Wine racks America Wall Display
- Page 1 Wall Display Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 1 Screwless Connectors Standard Connectors Trim Piece Top Supports End Ladder Middle Ladder Standard Base Connector Small Bottle Support Trim Piece Large Bottle Support Screwless Connectors Screwless Base Connector Package Contents tools for assembly *Please verify that you have the correct number of parts before proceeding.
- Page 2 Step 3: Attach top screwless connectors and top supports using brad nailer or provided finish nails. *NOTE: If you are planning on adding a top to your wall display, you will need to remove the front and back trim pieces, as well as the top supports before installing.
- Page 3 ATTACHING YOUR RACK TO THE WALL Step 6: Use a screwdriver or cordless drill to attach vertical bottle holders to the wall display rack. Place vertical bottle holder so the bottom is resting on the connector. Drive screws through pre-drilled holes on the sides of the vertical supports.
- Page 4 Wall Display Questions? 888.373.6057 Assembly GUIDE or visit wineracksamerica.com Page 4 ATTACHING YOUR RACK TO THE WALL ATTACHING YOUR RACK TO THE WALL Depending on how many bottles you store, your wine cellar rack could weigh as much as 540 lbs.
Need help?
Do you have a question about the Wall Display and is the answer not in the manual?
Questions and answers