Controller Echo-Request Interval; Controller Mode - H3C S6820 Series Command Reference Manual

Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
interval: Specifies the reconnection interval in the range of 10 to 120 seconds.
Examples
# Configure OpenFlow instance 1 to reconnect to a controller every 10 seconds.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] controller connect interval 10

controller echo-request interval

Use controller echo-request interval to set the echo request interval for an OpenFlow switch.
Use undo controller echo-request interval to restore the default.
Syntax
controller echo-request interval interval
undo controller echo-request interval
Default
The echo request interval is 5 seconds for an OpenFlow switch.
Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
interval: Specifies the echo request interval in the range of 1 to 10 seconds.
Examples
# Set the echo request interval to 10 seconds for OpenFlow instance 1.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] controller echo-request interval 10

controller mode

Use controller mode to set the controller mode for an OpenFlow instance.
Use undo controller mode to restore the default.
Syntax
controller mode { multiple | single }
undo controller mode
5