Harbor Breeze WCK52NWZ5D Manual page 6

INITIAL INSTALLATION
2. Determine mounting method to use.
A. Downrod mount (standard or angled ceiling)
B. Closemount (standard ceiling only)
IMPORTANT: If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance.
Check to make sure blades (G) will be at least 30
3.
inches from any obstruction and at least 7 ft. above
the floor.
4a. Loosen canopy mounting screws (K) in slotted
holes in canopy (B) and remove the other two
canopy mounting screws (K) -- save canopy
mounting screws (K) for later use. Remove
mounting bracket (C) from canopy (B).
2
A
B
3
G
7 ft.
min.
4a
K
6
30 in.
min.
C
K
B