Document Information - u-blox NEO-M8U Hardware Integration Manual

Document Information

Title
Subtitle
Document type
Document number
Revision and date
Document status
Product status
Corresponding content status
In Development / Objective Specification
Prototype
Engineering Sample Advance Information
Initial Production Early Production Information
Mass Production / Production Information
End of Life
European Union regulatory compliance
NEO-M8U compile with all relevant requirements for RED 2014/53/EU. The NEO-M8U Declaration of
Conformity (DoC) is available at
This document applies to the following products:
Product name Type number
NEO-M8U NEO-M8U-04B-00
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only
permitted with the express written permission of u-blox.
The information contained herein is provided "as is" and u-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent
documents, visit www.u-blox.com.
Copyright © u-blox AG.
UBX-15016700 - R07
Production Information
NEO-M8U
u-blox M8 Untethered Dead Reckoning module including 3D inertial sensors
Hardware Integration Manual
UBX-15016700
R07
Production Information
Target values. Revised and supplementary data will be published later.
Data based on early testing. Revised and supplementary data will be published later.
Data from product verification. Revised and supplementary data may be published later.
Document contains the final product specification.
www.u-blox.com within Support > Product resources > Conformity Declaration.
ROM/FLASH version
FLASH FW 3.01 UDR 1.21
Document Information
NEO-M8U - Hardware Integration Manual
18-Apr-2019
PCN reference
N/A
Page 2 of 28