If This Indication Appears; Setting The Current Time - Tiger JBX-A Series Operation Instructions Manual

16
Troubleshooting
Symptom
"0:00" blinks on the display when the Are the current time, preset timer
power plug is connected. settings, and elapsed Keep Warm
time lost when the power plug is
connected again?
The [Keep Warm/Cancel] key
and [Timer] key were pressed
simultaneously.
Condensation collects in the upper Condensation may collect in the upper casing immediately after rice is
casing. cooked or while the Keep Warm function is on but it is not a malfunction.
Wipe the upper casing using a dry cloth when condensation collects.
Nothing happens when a key is Is the appliance plug properly
pressed. connected to the appliance plug inlet
of the rice cooker and the power
plug connected to an outlet?
Is the Keep Warm lamp lit?
The lid does not close or opens Are there any cooked rice or grains
during cooking. of rice on the upper casing and
inner lid gasket, or around the hook
button?
Is the inner lid set in the rice cooker? Set the inner lid.
There is a smell of plastic. Such smells may occur when the rice cooker is first used, however, they
should go away over time.
There are stripes or waves on plastic Such stripes and waves are produced when the resin is being molded.
parts. They do not affect the performance of the rice cooker.
Food sticks to the lid during When cooking with ingredients that expand during heating, such as eggs
concurrent cooking. and the like, some of the ingredients may stick to the inner lid. If this is an
issue, reduce the amount of the ingredients.

If this indication appears

Display
A code starting with "E" appears on the There is a possibility of malfunction. Disconnect the power plug and
display. contact the place of purchase to request repairs.
Plastic parts
Plastic parts that are exposed to heat or steam may deteriorate over time. In this case, contact the place of
purchase.
42 42 42 42
Check point Action
The lithium battery has run out,
however, normal cooking can be
performed.
Contact the place of purchase to
request services for lithium battery
replacement.
Set the correct present time.
Be sure to connect the appliance
plug to the appliance plug inlet and
the power plug to an outlet.
Press the [Keep Warm/Cancel] key
to turn off the Keep Warm function
and then try the operation again.
Completely remove all remaining
rice.
Action

Setting the current time

Reference
page
The current time is displayed in a 24-hour format. The rice cooker has a built-in lithium battery, and it can
store the current time and preset timer settings and elapsed Keep Warm time even with the power plug
10
disconnected.
The time cannot be set when the following operations are being performed.
• During cooking, when the Keep Warm function is on, the preset time is set, the Timer function is in use, and during
additional heating
43
• While "Porridge", "Slow Cook" or "Cake" is selected
„ Example: Changing the current time from "9:30 AM" to "9:35 AM"
18
1
Connect the power cord.
15
2
Display the time setting mode.
15
Press the [Hour] or [Min] key.
14,
32
to
33
–
–
22
Reference
page
–
3
Set the current time.
• Set the hour using the [Hour] key and the
minute using the [Min] key.
• Hold down the corresponding key to change
the time more rapidly.
lights up.
• Press the [Menu] key after setting the current
time to complete the procedure for setting
the current time.
On
On
• To cancel setting the time, press the
Warm/Cancel] key .
turns off.
[Keep
43