Table of Contents
Advertisement
Initialization
The SloMoPro configuration and T-Bar calibration can be reset by holding the
SHIFT button while applying power to the SloMoPro. After doing so, the display will
show:
Then the display will show:
Follow the directions on the display.
This calibrates the T-Bar for optimum range. These values are stored in nonvolatile
memory and should never need to be changed. After performing this, the
SloMoPro will revert to normal operation.
SloMoPro USB User Manual
Memory
Initialized
TBAR NEEDS
CALIBRATION
MOVE TO TOP
AND PRESS ENTER
MOVE TO BOTTOM
AND PRESS ENTER
6
Advertisement
Table of Contents
